Show Snmpv3 Engine-Info - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show snmpv3 engine-info

show snmpv3 engine-info
Description
Displays information about the SNMPv3 engine on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following show engine-info output is displayed:
Engine-ID—Either the ID auto generated from MAC address of switch, or the ID manually
●
configured.
Engine Boots—Number of times the agent has been rebooted.
●
Engine Time—Time since agent last rebooted, in centiseconds.
●
Max. Message Size—Maximum SNMP Message size supported by the Engine (8192).
●
Example
The following command displays information about the SNMPv3 engine on the switch:
show snmpv3 engine-info
The following is sample output from this command:
SNMP Engine-ID
SNMP Engine Boots
SNMP Engine Time
SNMP Max. Message Size
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
: 80:0:7:7c:3:0:30:48:41:ed:97 'H'
: 1
: 866896
: 8192
show snmpv3 engine-info
217