Configure Log Filter Events Match - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics

configure log filter events match

configure log filter <name> [add | delete] {exclude} events [<event-
condition> | [all | <event-component>] {severity <severity> {only}}] [match
| strict-match] <type> <value>
Description
Configures a log filter to add or delete detailed feature messages based on a specified set of events and
match parameter values.
Syntax Description
name
add
delete
exclude
event-condition
all
event-component
severity
only
match
strict-match
type
value
Default
If the
exclude
specified, then the filter will use the component default severity threshold (see the note on
when
delete
Usage Guidelines
This command controls the incidents that pass a filter by adding, or deleting, a specified set of events
that match a list of
log filter events
parameter values to the event.
See the
configure log filter events
using filters, on event conditions and components, and on the details of the filtering process. The
discussion here is about the concepts of matching
filters.
576
Specifies the filter to configure.
Add the specified events to the filter.
Remove the specified events from the filter.
Events matching the filter will be excluded.
Specifies the event condition.
Specifies all events.
Specifies all the events associated with a particular component.
Specifies the minimum severity level of events (if the keyword only is omitted).
Specifies only events of the specified severity level.
Specifies events whose parameter values match the <type> <value> pair.
Specifies events whose parameter values match the <type> <value> pair, and
possess all the parameters specified.
Specifies the type of parameter to match. For more information about types
and values see
Specifies the value of the parameter to match. For more information about
types and values see
keyword is not used, the events will be included by the filter. If
or is specified).
exclude
pairs. This command is an extension of the command
<type> <value>
, and adds the ability to filter incidents based on matching specified event
"Types and Values" on page
"Types and Values" on page
command on page 573 for more information on specifying and
<type> <value>
ExtremeWare XOS 11.5 Command Reference Guide
577.
577.
is not
severity
on page 574
configure
pairs to more narrowly define