Configure Lldp Ports Vendor-Specific Dot1 Vlan-Name - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure lldp ports vendor-specific dot1 vlan-name

configure lldp ports [all | <port_list>] [advertise | dont-advertise]
vendor-specific dot1 vlan-name {vlan [all | <vlan_name>]}
Description
Configures the LLDP port to advertise or not advertise VLAN name information to its neighbors. Use
this TLV to advertise information for the tagged VLANs you want to specify on the port. This allows an
IEEE 802.1Q-compatible 802 LAN station to advertise the assigned name of any VLAN with which it is
configured.
Syntax Description
all
port_list
advertise
no-advertise
vlan
vlan_name
Default
No advertise.
Usage Guidelines
The VLAN name TLV sends the VLAN name and the tag used; it associates a name to a tag for the
specified VLAN. This allows an IEEE 802.1Q-compatible 802 LAN station to advertise the assigned
name of any VLAN with which it is configured.
You can enable this TLV for tagged and untagged VLANs. When you enable this TLV for tagged
VLANs, the TLV advertises the IEEE 802.1Q tag for that VLAN. (For untagged VLANs, the internal tag
is advertised.) You can specify exactly which VLANs to advertise.
When configured to advertise, the switch inserts a VLAN name TLV for every VLAN configured on the
ports. By default, once you configure this TLV, the system sends all VLAN names on the port. However,
each VLAN name can require up to 32 bytes and the LLDPDU cannot exceed 1500 bytes, so you should
configure the port to advertise only the specified VLANs, using the keyword
NOTE
The total LLPDU size is 1500 bytes; any TLVs after that limit are dropped.
ExtremeWare XOS 11.5 Command Reference Guide
configure lldp ports vendor-specific dot1 vlan-name
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
Specifies all VLANs on the port.
Specifies the VLAN on the port that you want to advertise.
.
vlan_name
471