Configure Vlan Qosprofile - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure vlan qosprofile

configure vlan <vlan_name> {qosprofile} <qosprofile>

Configures a VLAN to use a particular QoS profile.

Syntax Description

The default for the BlackDiamond 10808 and 12804 switch is QP1, and the default for the BlackDiamond

8800 series switch and the Summit X450 family of switches is none.

Usage Guidelines

Extreme switches support eight QoS profiles (QP1 to QP8) for each port.

This command applies only to untagged packets on the BlackDiamond 10808 and BlackDiamond 12804 switches.

The following command configures VLAN accounting to use QoS profile QP3:

configure vlan accounting qosprofile qp3

This command was first available in ExtremeWare XOS 11.0.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies a VLAN name.

Specifies a QoS profile.

NOTE: None is available only on the BlackDiamond 8800 series switch and the

Summit X450 family of switches.

configure vlan qosprofile

Extremeware xos 11.5