Extreme Networks ExtremeWare XOS Command Reference Manual page 648

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics
You can also use the following command to enable displaying the log on the console:
enable log display
The
enable log display
command.
Modular Switches Only. Note that the
primary-msm
Example
The following command enables log messages on the current session:
enable log target session
History
This command was first available in ExtremeWare XOS 10.1.
The
primary-msm
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
Platform Availability
This command is available on all platforms.
648
command is equivalent to the
backup-msm
target is only active on the backup MSM.
and options were first available in ExtremeWare XOS 11.0.
backup-msm
enable log target console-display
target is only active on the primary MSM, and the
ExtremeWare XOS 11.5 Command Reference Guide