Configure Snmpv3 Add Group User - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the Switch

configure snmpv3 add group user

configure snmpv3 add group [[hex <hex_group_name>] | <group_name>] user
[[hex <hex_user_name>] | <user_name>] {sec-model [snmpv1| snmpv2c | usm]}
{volatile}
Description
Adds a user name (security name) to a group.
Syntax Description
hex_group_name
group_name
hex_user_name
user_name
sec-model
snmpv1
snmpv2c
usm
volatile
Default
The default values are:
sec-model—USM
●
non-volatile storage
●
Usage Guidelines
Use this command to associate a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name username, the security name value is the same,
username.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
Example
The following command associates the user userV1 to the group defaultRoGroup with SNMPv1 security:
configure snmpv3 add group defaultRoGroup user userV1 sec-model snmpv1
136
Specifies the group name to add or modify. The value is to be supplied as a
colon separated string of hex octets.
Specifies the group name to add or modify in ASCII format.
Specifies the user name to add or modify. The value to follow is to be supplies
as a colon separated string of hex octets.
Specifies the user name to add or modify in ASCII format.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies volatile storage.
ExtremeWare XOS 11.5 Command Reference Guide