Extreme Networks ExtremeWare XOS Command Reference Manual page 224

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the Switch
The following command shows information about the group testgroup and user name testuser:
show snmpv3 group testgroup user testuser
The following is sample output from this command:
Group Name
Security Name
Security Model
Storage Type
Row Status
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_group_name
Platform Availability
This command is available on all platforms.
224
: testgroup
: testuser
: USM
: NonVolatile
: Active
and parameters were added in ExtremeWare XOS 11.0.
hex_user_name
ExtremeWare XOS 11.5 Command Reference Guide