Enable Syslog - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

enable syslog

enable syslog
Description
Enables logging to all remote syslog host targets.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
To enable remote logging, you must do the following:
Configure the syslog host to accept and log messages.
●
Enable remote logging by using the
●
Configure remote logging by using the
●
When you use the
enable syslog
also determines the initial state of an added remote syslog target.
Example
The following command enables logging to all remote syslog hosts:
enable syslog
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
command.
enable syslog
configure syslog
command, the exporting process of the syslog begins. This command
command.
enable syslog
657