Disable Jumbo-Frame Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

Commands for Configuring Slots and Ports on a Switch

disable jumbo-frame ports

disable jumbo-frame ports [all | <port_list>]

Disables jumbo frame support on a port.

Syntax Description

Usage Guidelines

BlackDiamond 8800 series switch (formerly known as Aspen) and the Summit X450 family of switches

only. You must enable or disable jumbo frames for the entire switch; the BlackDiamond 8800 series

switch and the Summit X450 family of switches do not support enabling or disabling jumbo frames by

BlackDiamond 10808 and 12804 switch only. You can enable jumbo frames per ports.

The following command disables jumbo frame support on slot 1, port 2 on a BlackDiamond 10808

disable jumbo-frame ports 1:2

The following command disables jumbo frame support on a BlackDiamond 8810 switch:

disable jumbo-frame ports all

This command was first available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

Specifies all ports.

Specifies one or more ports or slots and ports.

NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of

switches support only all ports; you cannot enable or disable jumbo frames by

port on the switch.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5