Extreme Networks ExtremeWare XOS Command Reference Manual page 887

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Priority—By default, each qosprofile is assigned a different priority level, which varies by I/O
●
module:
1G I/O module:
■
IQP1 - 1, Low
■
IQP2 - 2, LowHi
■
10G I/O module:
■
IQP1 - 1, Low
■
IQP2 - 2, LowHi
■
IQP3 - 3, Normal
■
IQP4 - 4, NormalHi
■
IQP5 - 5, Medium
■
IQP6 - 6, MediumHi
■
IQP7 - 7, High
■
IQP8 - 8, HighHi (highest priority)
■
Usage Guidelines
The number of ingress queues per port varies between the 1G I/O module and the 10G module.
On the 1G module, you have two ingress queues per port. The priority values of 1 to 4 map to the first
queue, and the priority values of 5 to 8 map to the second queue.
On the 10G module, you have eight ingress queues per port. The priority values of 1 to 8 map one to
each of the eight queues.
Example
The following command configures the ingress rate shaping parameters of QoS profile IQP3 for
specified ports, using bandwidth percentages:
configure qosprofile ingress iqp3 minbw 27 maxbw 57 priority 4 ports 3:2
The following command configures the ingress rate shaping parameters for QoS profile IQP3 for all
ports, using absolute values for committed rate and peak rate:
configure qosprofile ingress iqp3 committed-rate 64 k peak-rate 1000 k priority 4
ports all
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
The basic command is available only on the BlackDiamond 10808 switch.
ExtremeWare XOS 11.5 Command Reference Guide
configure qosprofile ingress ports
887