Show Cfm - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Connectivity Fault Management

show cfm

show cfm {<domain_name> {<association_name> {{ports <port_list>} {[end-
point [inward-facing | outward-facing] | intermediate-point | filter-
function]]}}}}
Description
Displays the current CFM configuration on the switch.
Syntax Description
domain_name
association_name
port_list
inward-facing
outward-facing
intermediate-point
filter-function
Default
N/A.
Usage Guidelines
This command displays the following information:
Domain names
●
MA levels
●
Association names
●
VLAN names
●
Inward-facing MEPs
●
MEPIDs
●
MEP transmit intervals
●
Outward-facing MEPs
●
Intermediate points (MIPs)
●
Total number of CFM ports on the switch
●
See "Supported Instances for CFM"
associations supported on the switch.
446
Enter the name of the domain you want to display.
Enter the name of the association you want to display.
Enter the ports in the domain and association you want to display.
Enter this to display the inward-facing MEP for the specified MA.
Enter this to display the outward-facing MEP for the specified MA.
Enter this to display the MIPs for the specified MA.
Enter this to display the CFFs for the specified MA.
for the number of domains, ports, MEPs, MIPs, CFFs, and
ExtremeWare XOS 11.5 Command Reference Guide