Extreme Networks ExtremeWare XOS Command Reference Manual page 620

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics
The
enable syslog
server(s). Syslog is disabled by default. A total of four syslog servers can be configured at one time.
When a syslog server is added, it is associated with the filter DefaultFilter. Use the
target filter
The syslog facility level is defined as local0 – local7. The facility level is used to group syslog data.
Example
The following command configures the remote syslog server target with a critical severity:
configure syslog 123.45.67.78 local1 critical
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was first available in ExtremeWare XOS 11.0.
ipPort
Platform Availability
This command is available on all platforms.
620
command must be issued in order for messages to be sent to the remote syslog
command to associate a different filter.
configure log
ExtremeWare XOS 11.5 Command Reference Guide