Show Snmpv3 Group - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the Switch

show snmpv3 group

show snmpv3 group {[[hex <hex_group_name>] | <group_name>] {user [[hex
<hex_user_name>] | <user_name>]}}
Description
Displays the user name (security name) and security model association with a group name.
Syntax Description
hex_group_name
group_name
hex_user_name
user_name
Default
N/A.
Usage Guidelines
The
show snmpv3 group
do not specify a group name, the command will display details for all the groups.
This command displays the SNMPv3 vacmSecurityToGroupTable.
Example
The following command displays information about all groups for every security model and user name:
show snmpv3 group
The following is sample output from this command:
Group Name
Security Name
Security Model
Storage Type
Row Status
Group Name
Security Name
Security Model
Storage Type
Row Status
222
Specifies the group name to display. The value is to be supplied as a colon
separated string of hex octets.
Specifies the group name to display. The value is to be supplied in ASCII
format.
Specifies the user name to display. The value is to be supplied as a colon
separated string of hex octets.
Specifies the user name to display. The value is to be supplied in ASCII
format.
command displays the details of a group with the given group name. If you
: v1v2c_ro
: v1v2c_ro
: snmpv1
: Permanent
: Active
: v1v2c_rw
: v1v2c_rw
: snmpv1
: Permanent
: Active
ExtremeWare XOS 11.5 Command Reference Guide