Using Telnet With Extreme Switches; Running An Interactive Telnet Session On An Individual Switch; An Open Telnet Session For A Switch In The Extremeview - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

U T E S
SING ELNET WITH XTREME WITCHES
5 To close an open connection, select the switch and click the Closed button.
To view the results of the macro execution on a particular switch, select the switch in
the Telnet switch list in the Component Tree. This will display a telnet session display
for the switch. Because it displays an active telnet session, you can use this page to view
the progress of the macro as the various ExtremeWare commands are executed.
R I T S I S
UNNING AN NTERACTIVE ELNET ESSION ON AN NDIVIDUAL WITCH
You can open a Telnet session on an individual switch, and execute commands
interactively by selecting the switch from the Telnet switch list in the Component Tree.
This opens a Telnet session to the selected switch, and then waits for command input,
just as with any other Telnet session.
Figure 6-11: An open Telnet session for a switch in the ExtremeView applet
The Telnet session window is a two-tone window—the bottom of the window is white,
the top is grey. The last 25 lines of Telnet commands and responses always appear in
E W E M I U G 6-13
XTREME ARE NTERPRISE ANAGER NSTALLATION AND SER UIDE