Extreme Networks ExtremeWare XOS Command Reference Manual page 364

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring Slots and Ports on a Switch
The following example defines a dynamic LAG on a stand-alone switch containing ports 10 through 15,
with port 10 being the logical port:
enable sharing 10 grouping 10-15 lacp
History
This command was first available in ExtremeWare XOS 10.1.
The address-based algorithm was added in ExtremeWare XOS 11.0.
The L2 and L3 optional parameters were added in ExtremeWare XOS 11.1.
IPv6-compatibility was added in ExtremeWare XOS 11.2.
Dynamic link aggregation, using LACP, was added in ExtremeWare XOS 11.3.
The L3_L4 optional parameter was added in ExtremeWare XOS 11.5.
Platform Availability
This command is available on all platforms.
364
ExtremeWare XOS 11.5 Command Reference Guide