ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring Slots and Ports on a Switch
BlackDiamond 8800 series switch and the Summit X450 family of switches only. The following command
displays more specific information for slot 3, port 1 on a BlackDiamond 8810 switch:
show ports 3:1 information detail
Following is sample output from this command:
Port:
3:1
Virtual-router: VR-Default
Type:
Random Early drop:
Admin state:
ELSM Link State:
Link State:
Link Counter: Up
VLAN cfg:
STP cfg:
Protocol:
Trunking:
EDP:
ELSM:
Learning:
Unicast Flooding:
Multicast Flooding:
Broadcast Flooding:
Jumbo:
Egress Port Rate:
Broadcast Rate:
Multicast Rate:
Unknown Dest Mac Rate:
QoS Profile:
Ingress Rate Shaping :
Ingress IPTOS Examination:
Ingress 802.1p Examination:
Ingress 802.1p Inner Exam:
Egress IPTOS Replacement:
Egress 802.1p Replacement:
NetLogin:
NetLogin authentication mode:
NetLogin port mode:
Smart redundancy:
Software redundant port:
autopolarity:
BlackDiamond 10808 and BlackDiamond 12804 switch only. The following command displays more
specific information for slot 1, port 1 on a BlackDiamond 10808 switch:
show ports 1:1 information detail
394
UTP
Unsupported
Enabled with
Up
Active, 1 Gbps, full-duplex
1 time(s)
Name: Default, Internal Tag = 1 (MAC-Based), MAC-limit = No-limit
s0(disable), Tag=(none), Mode=802.1D, State=FORWARDING
Name: Default
Protocol: ANY
Load sharing is not enabled.
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled, MTU= 9216
128 Kbps, Max Burst Size: 200 Kb
No-limit
No-limit
No-limit
QP3 configured by user
auto-speed sensing
auto-duplex
Match all protocols.
Unsupported
Disabled
Enabled
Disabled
Disabled
Disabled
Enabled
MAC based
MAC based VLANs
Enabled
Disabled
Enabled
ExtremeWare XOS 11.5 Command Reference Guide