Show Log Configuration Target - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Status Monitoring and Statistics

show log configuration target

show log configuration target {console | memory-buffer | nvram | primary-
msm | backup-msm | session | syslog {<ipaddress> | <ipPort> | vr <vr_name>}
{[local0 ... local7]}}
Description
Displays the log configuration for the specified target.
Syntax Description
console
memory-buffer
nvram
primary-msm
backup-msm
session
syslog
ipaddress
ipPort
vr_name
local0 ... local7
Default
If no options are specified, the command displays the configuration for the current session and console
display.
If a virtual router is not specified, VR-Mgmt is used.
Usage Guidelines
NOTE
The BlackDiamond 8800 series switch and the Summit X450 family of switches do not support user-created VRs.
This command displays the log configuration for the specified target. The associated filter, severity,
match expression, and format is displayed.
680
Show the log configuration for the console display.
Show the log configuration for volatile memory.
Show the log configuration for NVRAM.
Specifies the primary MSM.
NOTE: This parameter is available only on modular switches.
Specifies the backup MSM.
NOTE: This parameter is available only on modular switches
Show the log configuration for the current session (including console display).
Show the configuration for the specified syslog target.
Specifies the syslog IP address.
Specifies the UDP port number for the syslog target.
Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 series switch and the Summit X450 family of
switches do not support user-created VRs.
Specifies the local syslog facility.
ExtremeWare XOS 11.5 Command Reference Guide