Show Bvlan - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
VLAN Commands

show bvlan

show bvlan {<bvlan_name> {ipv4 | ipv6}} {detail}
Description
Displays BVLAN configuration. BVLANs are used in MAC-in-MAC tunneling (IEEE 802.1ah)
configurations.
Syntax Description
bvlan_name
ipv4
ipv6
detail
Default
Summary information for all BVLANs on the device.
Usage Guidelines
None.
NOTE
To display the EtherType for IEEE 802.1ah MAC-in-MAC tunneling (BVLAN), use the command show vman
ethertype.
Example
The following is an example of the display from the
* BD-10808.6 # show bvlan
--------------------------------------------------------------------------------------
Name
--------------------------------------------------------------------------------------
test
--------------------------------------------------------------------------------------
Flags : (C) EAPS Control vlan, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled, (L) Loopback
Enabled, (m) IPmc Forwarding Enabled,
(n) IP Multinetting Enabled, (N) Network LogIn vlan,
(o) OSPF Enabled, (p) PIM Enabled,
774
Specifies information is displayed for particular BVLAN.
Not supported in ExtremeWare XOS version 11.4.
Not supported in ExtremeWare XOS version 11.4.
Specifies all information is displayed for each BVLAN.
VID Protocol Addr
4091 -------------------- ----------------B
command:
show bvlan
Flags
ExtremeWare XOS 11.5 Command Reference Guide
Proto Ports Virtual
Active router
/Total
ANY 0 /0 VR-Default