Unconfigure Lldp - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Configuring LLDP

unconfigure lldp

unconfigure lldp {ports [all | <port_list>]}
Description
Leaves LLDP enabled and configured; restores the LLDP timer default values.
Syntax Description
all
port_list
Default
N/A.
Usage Guidelines
When you issue the global
configured TLVs remain on the ports remain, and LLDP remains enabled.
When you use the keyword
remains enabled.
Example
The following command restores LLDP factory default TLVs for ports 1:4 to 1:8:
unconfigure lldp ports 1:4 - 1:8
History
This command was first available in ExtremeWare XOS 11.2.
The keyword port was changed to ports in ExtremeWare XOS 11.5.
Platform Availability
This command is available on all platforms.
506
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
, only the LLDP timers are reset to default values. All the
unconfigure lldp
, the TLVs for each port are returned to the five default TLVs. LLDP
ports
ExtremeWare XOS 11.5 Command Reference Guide