Configure Cfm Domain Association Delete End-Point - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure cfm domain association delete end-point

configure cfm domain <domain_name> association <association_name> ports
<port_list> delete end-point [inward-facing | outward-facing ]
Description
Deletes a maintenance end point (MEP) from that MA; use this command to delete either the inward-
facing or the outward-facing MEP.
Syntax Description
domain_name
association_name
ports
inward-facing
outward-facing
Default
N/A.
Usage Guidelines
Use this command to delete an MEP.
Use the command to verify your configuration.
show cfm
Example
The following command deletes port 5:10 as the inward-facing MEP on the test association in the brazil
domain:
configure cfm domain brazil association test ports 5:10 delete end-point inward-facing
History
This command was first available in ExtremeWare XOS 11.4.
Platform Availability
This command is available only on the BlackDiamond 10808 and 12804 switches.
ExtremeWare XOS 11.5 Command Reference Guide
Enter the domain associated with the MA you are configuring.
Enter the name of the MA for which you are deleting an MEP.
Enter the port number you want to delete as either in inward-facing or an
outward-facing MEP.
Enter the port of the inward-facing MEP you are deleting.
Enter the port of the outward-facing MEP you are deleting.
configure cfm domain association delete end-point
425