Modifying A Telephone; Checking A Telephone's Status - 3Com NBX 100 Administrator's Manual

Modifying a
Telephone
Checking a
Telephone's Status
Table 23 Add Telephone Dialog Box Fields (continued)
Field
,
First Name
Last Name, Title,
Location 1,
Location 2, and
Department
4 Click Apply to configure this telephone. You can then configure
additional telephones using the same menu.
5 Click OK.
To modify a telephone:
1 Select NBX NetSet >
2 Select the telephone that you want to modify from the list.
3 Click Modify . The Modify Telephones dialog box appears.
4 Change the desired fields. See
5 Click Apply to make your changes.
6 Click OK.
To check the status of a telephone:
1 Select
Device Configuration
2 Select the telephone for which you want a status report from the list box.
3 Click . The Device Status dialog box appears.
Status
4 View the device status and make any desired changes.
the fields and check boxes on this dialog box.
5 When you finish, click Apply, and then click OK.
Table 24 Device Status Fields
Field
MAC Address
Adding, Removing, and Modifying Telephones
Description
These optional fields appear in NBX NetSet lists that display
the telephone information and can help you identify it. Last
Name is used to find a user in the dial by name directory of
the Auto Attendant.
Location 1 and Location 2 enable you to provide detailed
information about the location of the telephone (required for
E911 (Enhanced 911) emergency service).
Device Configuration > Telephones
Table 23
> .
Telephones
Description
The telephone's hardware address. The MAC address
appears on the bottom of the telephone.
.
for definitions of each field.
Table 24
131
describes