Integrating Third -Party Messaging; Installing Software On The Third-Party Messaging Server; Configuring The Nbx System - 3Com NBX 100 Administrator's Manual
3com networked telephony solutions administrator's guide
Hide thumbs
Also See for NBX 100:
- Administrator's manual (482 pages) ,
- Installation manual (306 pages) ,
- Manual (76 pages)
Table of Contents
Advertisement
A
Installing Software
on the Third-Party
Messaging Server
Configuring the
NBX System
I
NTEGRATING
M
ESSAGING
The NBX system can operate with a third-party messaging system. This
appendix describes the steps that you must perform to use a third-party
messaging system with the NBX system:
Installing Software on the Third-Party Messaging Server
■
Configuring the NBX System
■
Configuring NBXTSP on the Server
■
You must install the NBX Media Driver and the NBX TAPI Service Provider
(NBXTSP) on the third-party messaging server. See your messaging
application's documentation for server requirements.
1 Install the NBX Media Driver application from the NBX Resource Pack CD
or the NBX Partner Access website.
2 Install the NBXTSP from the NBX Resource Pack CD or the NBX Partner
Access website.
You can also download the NBXTSP from your NBX system by connecting
to the NBX NetSet utility from a browser located on the third-party
messaging server.
To activate third-party messaging on the NBX system use the NBX NetSet
utility to perform the tasks described in this section.
Add the NBX Third-party Messaging and Media Driver licenses
■
Make sure Auto Discover Telephones is enabled
■
Disable NBX messaging
■
Create a Hunt Group for the third-party messaging system
■
Modify the Voice Mail Extensions List
■
All NBX NetSet procedures require an administrator login.
T
-P
HIRD
ARTY
Advertisement
Table of Contents
Troubleshooting
