Removing A Dial Plan Table; Managing Dial Plan Pretranslators; Identifying Devices Using Pretranslators - 3Com SuperStack 3 NBX Administrator's Manual

Removing a
Dial Plan Table
Managing Dial Plan
Pretranslators
Identifying Devices
Using Pretranslators
This section describes how to remove a dial plan table. Note that you
must not remove any of the predefined tables (Internal, Incoming, or
Least Cost).
CAUTION: You cannot remove a dial plan table if a device is using it.
To remove the table, you must first remove all devices from the Devices
Using Table list.
To remove a dial plan table:
1 In the NBX NetSet – Main Menu window, click Dial Plan. The Dial Plan
window appears, displaying the Operations tab (Figure 3).
2 Click the Tables tab (Figure 14.)
3 Select the table you want to remove.
4 Click Remove. A dialog box prompts you to confirm the removal.
5 Click Yes.
Pretranslators are tables in the dial plan configuration file. Each entry in
a pretranslator table contains a string of one or more digits that are
compared to incoming or outgoing digits. When the digits match an
entry in the table, the NBX system performs the associated pretranslator
operations.
For more information, see:

Identifying Devices Using Pretranslators

■
Identifying Devices Using Pretranslators for CLI
■
Removing a Pretranslator from the Dial Plan
■
To view a list of devices and their associated pretranslators, or to associate
a pretranslator with a specific device:
1 In the NBX NetSet – Main Menu window, click Dial Plan.
2 Click the Pretranslators tab (Figure 16).

Managing Dial Plan Pretranslators

71