Verifying Line Card Port Status - 3Com SuperStack 3 NBX Administrator's Manual

216 C 3: D
HAPTER EVICE
Verifying Line Card
Port Status
C
ONFIGURATION
You can verify the status of a configured line port at any time.
To view the status of a line card port:
1 In the NBX NetSet - Main Menu window, click Device Configuration . The
Device Configuration dialog box appears (Figure 49).
2 Click the Line Card Ports tab. Line Card Ports dialog box appears
(Figure 72).
3 Select the port that you want to check from the list and click Status. The
Device Status dialog box appears (Figure 75).
Figure 75 Device Status Dialog Box
Table 34 describes the fields in the Device Status dialog box.
Table 34 Device Status Dialog Box Fields
Field
MAC Address
Purpose
The hardware address of the port, assigned at the factory.
If you are configuring a ConneXtions H.323 Gateway, the
MAC address is the address of the network interface card of
the computer that hosts the gateway program.
ConneXtions generates the address automatically, so do
not enter a MAC address for H.323 Gateway.
For information about installing line cards and determining
each port's MAC address, see the NBX Installation Guide.
The format for a MAC Address is XX:XX:XX:XX:XX:XX. Each
X represents a hexadecimal digit (0 through f).