Modifying A Line Card Port - 3Com NBX 100 Administrator's Manual

Table 33 Auto Extension Configuration (continued)
Button Mapping Setting
for This Line
Mapped to a button on the
Receptionist's Telephone (or
to a button on an Attendant
Console associated with the
Receptionist's telephone)
Mapped to a button on a user
telephone (or to a button on
an Attendant Console
associated with the user's
telephone)
Mapped to a button on a user
telephone (or to a button on
an Attendant Console
associated with the user's
telephone)
Modifying a
Line Card Port
Auto Extension
Setting
500
Extension of the
Receptionist
500
4 Click OK.
5 Connect your CO line to the configured port.
You can modify a line card port that is already configured.
To modify a line card port:
1 Select NBX NetSet >
2 Select the port you want to modify from the list.
3 Click Modify.
4 Specify the port information. The fields are the same as those described
in "Configuring a Line Card Port Manually"
Configuring and Managing Analog Line Card Ports
Incoming Call Behavior
Receptionist's telephone rings. If no one answers, the call
transfers to the Automated Attendant.
NOTE: The call coverage point defined for the receptionist's
telephone has no affect.
The transfer occurs after the number of seconds specified on
the Time Out line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
User telephone rings. If no one answers, the call transfers to
the Receptionist's telephone.
The transfer occurs after the number of seconds specified on
the Time Out line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
If the receptionist's telephone is not answered, the call
transfers to the call coverage point defined for the
receptionist's telephone.
User Configuration > Users > User Settings > Call Forward
User telephone rings. If no one answers, the call transfers to
the Automated Attendant.
The transfer occurs after the number of seconds specified on
the Time Out line in the Modify Line Card Port dialog box for
the appropriate time of day (Open, Closed, Lunch, Other).
Device Configuration > Line Card Ports > Modify
Device Configuration
> Line Card Ports.
on page 187.
191