Troubleshooting; Error & Status Messages On The Display Panel - Ricoh 2105 Operating Instructions Manual

Error & Status Messages on the Display
Panel
❖ ❖ ❖ ❖ Status messages
Message
Hex Dump Mode
Offline
Please Wait
Printing...
Ready
Resetting Job(s)...
Waiting...
❖ ❖ ❖ ❖ Alert messages
Messages/Second messages
Ethernet board has a prob-
lem.
NV-RAM has a problem.
Paper is left in the Finisher.
Open Finisher Front Cover
and remove the paper.
Parallel I/F board has a prob-
lem.
The selected paper tray is in
use by another function.
Please wait.
Staple unit is in use by anoth-
er function. Please wait.

4. Troubleshooting

In Hex Dump mode, the machine receives data in hexadecimal
format. Turn off the machine after printing, and then turn back on.
The machine is offline. Set the machine online by pressing [On-
line] on the display panel to start printing.
The machine is readying the development unit. Wait for a
while.
The machine is printing. Wait for a while.
The default ready message. The machine is ready for use. No
action is required.
The machine is resetting the print job. Wait until "Ready" ap-
pears on the display panel.
The machine is waiting for the next data to print. Wait for a while.
Description
An error has occurred in the
Ethernet board.
An error has occurred in the
optional memory unit.
There is paper remaining in-
side the finisher.
An error has occurred in the
parallel interface board.
The specified paper tray is in
use by another function such
as copier function.
The staple unit is in use by an-
other function such as copier
function.
Status
Solution
Turn off the main power
switch, and on. If the message
appears again, contact your
sales or service representative.
Turn off the main power
switch, and on. If the message
appears again, call your sales
or service representative.
Open the cover of finisher, and
remove the paper.
Contact your sales or service
representative.
Wait until the other function
has finished using the speci-
fied paper tray.
Wait until the other function
has finished using the staple
unit.
23