Troubleshooting; When A Panel Tone Beeps - Ricoh 407773 User Manual

3. Troubleshooting

This chapter provides solutions to common problems and it also explains how to correct unwanted print
results.

When a Panel Tone Beeps

The following table describes various beep patterns that the printer produces to alert users about printer
conditions and the meaning of each beep pattern.
Beep pattern
Single short beep
Two long beeps
Five long beeps repeated
four times.
Five short beeps repeated
five times.
• Beep alerts cannot be muted. If the printer's covers are opened and closed repeatedly within a
short space of time during an alert indicating a paper jam or insufficient toner, a beep alert might
continue, even after normal status has resumed.
• You can enable or disable beep alerts. For details, see "General Settings", Operating Instructions.
Meaning
Panel/screen input
accepted.
Printer has warmed up.
Soft alert
Strong alert
Causes
A control panel key was pressed.
When the power is turned on or the
printer exits Sleep mode, the printer
has fully warmed up and is ready for
use.
An error message appears on the
control panel if there is no tray for the
selected paper size or the tray is
empty.
The printer requires user attention
because paper has jammed, the toner
needs replenishing, or other problems
have occurred.
49