Setting Up For Printing; Setting Up Print Options - Ricoh AFICIO AP306 Setup Manual

Using RICOH-SCRIPT2 with a Macintosh

Setting up for Printing

Setting up Print Options

LaserWriter 8.3x or earlier
2
With the LaserWriter 8.3x or earlier driver, clicking [Options] on the [Printer] dia-
log box displays the settings specific to is printer.
Note
Selecting [Printer's Default] returns settings to their default values set from the
printer operation panel.
Reference
For more information about the LaserWriter 8.3x or earlier, see the documen-
tation that comes with your Macintosh.
Clicking [Option] in the [Printer] dialog box shows the following items:
• Auto Tray Switching
Turning on this setting tells the printer to automatically switch to the other
tray when it has the same size of paper as the current tray when paper runs
out while printing.
• Gradation
Use this to set the number of colors used per dot to [Fast] or [Standard].
• Color Mode
Use this to set the output color to [Color] or [Black and White].
• Color Setting
Use this to set the correction method used for the color conversion. The fol-
lowing items are available: [Off]
[Super Fine]
*1
No modification to the color setting.
*2
Select this setting to perform CMYK conversion with enhanced saturation and
brightness to print vivid colors.
*3
Select this setting to perform CMYK conversion. The colors printed with this
setting are more vivid than those printed with the [Vivid] setting. All of the
colors in the image, especially the lighter ones, are emphasized.
*4
Select this setting to perform color matching based on the printer's built-in
color rendering dictionaries, and perform CMYK conversion. It makes it pos-
sible to print colors that are close to the displayed colors on the computer
screen.
The color rendering dictionaries refer to the contents selected by the "Color
Profile" setting. This setting is useful when the application and printer driver
do not support the color matching features.
*5
Like the [Fine] setting, the color rendering dictionary is used, however, output
is more vivid. This setting is enabled to make light colors print more vividly
24
*5
.
*1 *2
, [Vivid] , [Super Vivid]
*3 *4
, [Fine] and
Draft 2000/06/22