Understanding The Displayed Information; Print Job Information; Print Log Information - Ricoh SCRIPT2 Setup Manual

Understanding the Displayed Information

This section describes how to read status information returned by the Network
Interface Board.

Print Job Information

The status of the print job can be viewed using the following commands.
• telnet : Use the status command. ⇒ P.83 "Printer status"
Item name
ID
Source
Process
Status
Time

Print Log Information

This is a record of the most recent ten jobs that have been printed.
This log can be displayed with the following commands.
• telnet : Use the prnlog command. ⇒ P.83 "Printer status"
Item name
ID
Source
Process
Bytes
Result
Meaning
Print request ID.
The name of the host requesting the print job.
The type of print command.
Status of print job.
• Active
Printing or preparing for printing.
• Waiting
Waiting to be transferred to the printer.
The time when the print request was received.
Meaning
Print request ID.
The user name, workstation name or address of the host that sent
the print job.
The type of print command used.
The size of the file in bytes.
Communication result.
• OK
Indicates that the print job was completed correctly.
• NG
Indicates that the print job was not completed normally.
• Canceled
rcp, rsh or lpr print commands were stopped. A problem oc-
curred with the printing application. This message doesn't ap-
pear when ftp or RPRINTER is used.
Understanding the Displayed Information
6
91