Canon imageRUNNER ADVANCE C5255 Series Service Manual page 921

COPIER > ADJUST > COLOR
PL-OFS-K Clr blnce adj of Bk low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of Bk at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-Y Clr blnce adj of Y mid dens area:PDL
Lv.2 Details To adjust the color balance of the medium density area of Y at PDL
print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-M Clr blnce adj of M mid dens area:PDL
Lv.2 Details To adjust the color balance of the medium density area of M at PDL
print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PM-OFS-C Clr blnce adj of C mid dens area:PDL
Lv.2 Details To adjust the color balance of the medium density area of C at PDL
print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8
Service Mode > COPIER > ADJUST > COLOR
8 Service Mode > COPIER > ADJUST > COLOR
COPIER > ADJUST > COLOR
PM-OFS-K Clr blnce adj of Bk mid dens area:PDL
Lv.2 Details To adjust the color balance of the medium density area of Bk at PDL
print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PH-OFS-Y Clr blnce adj of Y high dens area:PDL
Lv.2 Details To adjust the color balance of the high density area of Y at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PH-OFS-M Clr blnce adj of M high dens area:PDL
Lv.2 Details To adjust the color balance of the high density area of M at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PH-OFS-C Clr blnce adj of C high dens area:PDL
Lv.2 Details To adjust the color balance of the high density area of C at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8-101
8-101