Checking After Installation - Canon imageRUNNER ADVANCE C5255 Series Service Manual

16) Reinstall the removed covers and the connectors.
• Right Rear Cover 2 (2 Screws)
• Right Rear Cover 3
• Rear Lower Cover (2 Screws, 2 Claws)
• Cconnector of the Cassette Pedestal (1 Reuse Band)
• Connector Cover (1 Screw)
• Rear Cover (2 Screws, 2 Claws)
• Left Rear Cover (2 Screws, 2 Claws)
• Right Rear Cover 1 (3 Screws)
• Right Lower Cover
• Right Upper Cover

Checking after installation

1) Connect the power plug of the host machine to the power outlet.
2) Turn ON the main power switch.
3) Set the following service mode (level 1) value to "1".
• COPIER > FUNCTION > INSTALL > KEY
4) Turn OFF/ON the main power switch.
5) Make sure that [Set the control key] is displayed.
6) Insert the Control key into the Key Switch Unit and make sure that the machine is ready for
copy.
9
Installation > Key Switch Unit-A2 > Checking after installation
9 Installation > Key Switch Unit-A2 > Checking after installation
9-80
9-80