Checking After Installation; Operation Check - Canon imageRUNNER ADVANCE C5255 Series Service Manual

24) Pass the Speaker Cable through the hole of the Right Rear Cover 1, and close the
cover.
25) Pass the Speaker Cable to Cord Guide, and install the 3 Cord Guide covers.
9
Installation > Voice Guidance Kit-F2 > Operation Check > To stop the use
1) Connect the power plug of the host machine to the power outlet.
2) Open the switch cover and turn ON the main power switch.
3) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
4) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
F-9-250
■ During use
1) Press reset key 3 secs or more.
2) Press [Main Menu] in Control Panel.
3) If the display in panel screen is boxed with red frame, "Voice Guidance Kit" is available.
If "Voice Guidance Kit" doesn't properly operate, check the below.
F-9-251
■ To stop the use
1) Press the Reset Key for 3 secs or more.
9 Installation > Voice Guidance Kit-F2 > Operation Check > To stop the use

Checking after installation

NOTE:
When changing the settings upon user's request, it is required to log in as a system
manager in accordance with instructions from the user administrator.
make sure that [Use Voice Navigation] is [ON].
make sure that [Voice Guide from Speakers] is displayed.

Operation Check

Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether
languages to be used for TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE are properly installed.
9-96
9-96