Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1303

9) Connect the Signal Cable (80 mm; Red) (FK2-8436 or A: HDD-Sig1) and the Power Cable
(80 mm) (FK2-8461 or A: HDD-Pow1/2) to the first HDD (Slot 1).
CAUTION:
Install the cables to correct positions.
x2
10) Connect the Signal Cable (80 mm; Blue) (FK2-8438 or A: HDD-Sig2) and the Power
Cable (80 mm) (FK2-8461 or A: HDD-Pow1/2) to CHB on the Mirroring Board or Encryption
Board.
x2
9
Installation > [TYPE-5] > Installation Procedure > Installing the Mirroring Board or Encryption Board
11)
Cable (80 mm) (FK2-8461 or A: HDD-Pow1/2) to the second HDD (Slot 2).
CAUTION:
Install the cables to correct positions.
Signal Cable
Power Cable
F-9-622
12)
Signal Cable
Power Cable
F-9-623
9 Installation > [TYPE-5] > Installation Procedure > Installing the Mirroring Board or Encryption Board
Connect the Signal Cable (80 mm; Blue) (FK2-8438 or A: HDD-Sig2) and the Power
x2
Fix the cables with the wire saddle.
9-233
Signal Cable
Ppower Cable
F-9-624
Wire Saddle
F-9-625
9-233