When the version is upgraded via SST or with the USB memory storage device storage device, start the machine in Download mode. This machine has the following 2 Download modes similarly with

other iR-series models.

● Normal mode(recommend):

• Start from Copier > FUNCTION > SYSTEM > Download.

• Conventionally, the main power switch of this machine was turned ON while pressing 1 and 7 keys. However, the procedure above automatically assigns a static IP address and enables the

download same as before.

• You can obtain the version information and avoid unnecessary download and errors.

NOTE :

When entering Download mode, be sure to go into Service mode after all items of main menu have been displayed.

This machine reads the version information of system software when it starts. You must start Download mode after the version information has been obtained.

● Safe mode:

• Press 2 and 8 keys simultaneously on the numeric keypad when turning on the power.

* Be sure to use "Single mode" when using SST. SST "Assist mode" cannot be used in safe mode. Any mode can be used when using USB.

Troubleshooting > Version upgrade > Overview > Download Mode

6-26

Table of Contents