Removing The Hopper (Bk) - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure

Removing the Hopper (Bk)

■ Preparations
1) Release the lock of Toner Container (By service mode).
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.(Refer to page 4-104)
3) Remove the ITB Unit.(Refer to page 4-105)
4) Remove the Process Unit.(Refer to page 4-132)
5) Remove the Color Drum Heater (When the option is installed).(Refer to page 1-1)
6) Remove the Drum Heater (Bk).
7) Remove the Toner Container Front Inner Cover.(Refer to page 4-154)
8) Remove the Hopper (C).(Refer to page 4-161)
■ Procedure
1) Remove the Harness from the Fixing Guide.
Harness
Guide
2) Remove all the Toner Trays.
• 3 screws (M4 binding)
x3
4 Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure
3) Remove the Duct Sheet.
• 2 screws (binding)
F-4-285
F-4-286
x2
4-164
F-4-287
4-164