Canon imageRUNNER ADVANCE C5255 Series Service Manual page 580

● Steps to Upload Data
CAUTION:
• When the Canon quality-appointed staff determines the need for an analysis of
debug log by the R&D department, we ask the field to collect log for an investigation
to determine the cause.
• The backup data can be downloaded only on the machine from which the data were
uploaded.
• This machine does not use SramRCON and SramDcon
Service PC
SST
iR ----
Upload/Download
System
MeapBack
/ SramImg.bin
Main controller PCB2
SRAM
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Backup
iR ADVNCE C5051 Series
Main controller PCB1
HDD
SramImg.bin
Meapback.bin
Main controller
F-6-56
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Backup
● Listed below are the sample steps to upload MeapBack.
1) Enter Download mode.
2) Connect the PC to the machine to start SST.
3) Select the model to be connected and "Single". Check the network settings and click "Start".
4) Click "Upload Data" button.
6-42
F-6-57
F-6-58
6-42