Copy Card Reader-F1; Points To Note Before Installation; Checking The Contents - Canon imageRUNNER ADVANCE C5255 Series Service Manual

Copy Card Reader-F1

Points to Note Before Installation

• When installing the equipment, see the 'Combination Table of Accessory Installation'.
• To install the Copy Card Reader-F1, the Card Reader Mounting Kit-B3 is required.
• The following options cannot be used in combination with each other.
• Serial Interface Kit
• Copy Control Interface Kit

Checking the Contents

■ Copy Card Reader-F1
[1] Card Reader Unit X 1 [2] Screw
(RS tight; M4x10) X 1
9
Installation > Copy Card Reader-F1 > Checking the Contents > Card Reader Attachment-B3
■ Card Reader Attachment-B3
[3] Toothed washer X 1
F-9-252
9 Installation > Copy Card Reader-F1 > Checking the Contents > Card Reader Attachment-B3
[1] Card Reader Mounting [2] Card Reader Mounting
Plate (front) Unit X 1 Plate (rear) Unit X 1
[4] Card ReaderRelay [5] Connector Cover X 1
Unit X 1
[7] Cord Guide X 2 [8] PCB Spacer X 1
[10] Screw (TP; M3x6) X 5 [11] Screw
(TP; M3x12) X 2
Use 4 of them
[13] Screw
(Binding; M4x6) X 4
9-97
[3] Card Reader Mounting
Plate (lower) Unit X 1
[6] Card Reader External
Relay Harness X 1
[9] Wire Saddle X 1
[12] Screw
(TP; M4x12) X 2
F-9-253
9-97