Function - Canon imageRUNNER ADVANCE C5255 Series Service Manual

FUNCTION

■ INSTALL
COPIER(1)>FUNCTION(4)>INSTALL(1)(list:29)
STIR-Y Stirring of Y-color developer
Lv.1 Details To stir developer in the Y Developing Assembly.
Use case - At installation of the machine
- When an image failure occurs
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 60 sec(C5255/5250), 90 sec(C5240/5235)
Related service mode COPIER> FUNCTION> INSTALL> STIR-M, STIR-C, STIR-K, STIR-4
STIR-M Stirring of M-color developer
Lv.1 Details To stir developer in the M Developing Assembly.
Use case - At installation of the machine
- When an image failure occurs
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 60 sec(C5255/5250), 90 sec(C5240/5235)
Related service mode COPIER> FUNCTION> INSTALL> STIR-Y, STIR-C, STIR-K, STIR-4
STIR-C Stirring of C-color developer
Lv.1 Details To stir developer in the C Developing Assembly.
Use case - At installation of the machine
- When an image failure occurs
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 60 sec(C5255/5250), 90 sec(C5240/5235)
Related service mode COPIER> FUNCTION> INSTALL> STIR-Y, STIR-M, STIR-K, STIR-4
STIR-K Stirring of Bk-color developer
Lv.1 Details To stir developer in the Bk Developing Assembly.
Use case - At installation of the machine
- When an image failure occurs
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 60 sec(C5255/5250), 90 sec(C5240/5235)
Related service mode COPIER> FUNCTION> INSTALL> STIR-Y, STIR-M, STIR-C, STIR-4
STIR-4 Stirring of all color developer
Lv.1 Details To stir developer in the Developing Assemblies of 4 colors (Y/M/C/Bk).
Use case - At installation of the machine
- When an image failure occurs
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 60 sec(C5255/5250), 90 sec(C5240/5235)
Related service mode COPIER> FUNCTION> INSTALL> STIR-Y, STIR-M, STIR-C, STIR-K
INIT-Y [Not used]
INIT-M [Not used]
8
Service Mode > COPIER > FUNCTION > INSTALL
8 Service Mode > COPIER > FUNCTION > INSTALL
COPIER(1)>FUNCTION(4)>INSTALL(1)(list:29)
INIT-C [Not used]
INIT-K [Not used]
STRD-POS Scan position auto adj in DADF mode
Lv.1 Details To adjust the DADF scanning position automatically.
Use case At DADF installation/uninstallation
Adj/set/operate method 1) Close the DADF.
2) Select the item, and then press OK key.
The operation automatically stops after the adjustment.
3) Write the value displayed by COPIER>ADJUST>ADJ-XY>STRD-
POS in the service label.
Caution Write the adjusted value in the service label.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
Required time 10 sec
Related service mode COPIER> ADJUST> ADJ-XY> STRD-POS
CARD Card number setting
Lv.1 Details To set the card number to be used for Card Reader.
A series of numbers from the entered number to the number of cards
specified by CARD-RNG can be used.
Use case - At installation of the Card Reader
- After replacing the HDD
Adj/set/operate method 1) Enter the number, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution The card management information (department ID and password) is
initialized.
Display/adj/set range 1 to 2001
Default value 0
Related service mode COPIER> OPTION> FNC-SW> CARD-RNG (LEVEL2)
KEY ON/OFF of management key function
Lv.1 Details To set whether to enable or disable the management key function.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-128
8-128