Setting Check; Operation Check - Canon imageRUNNER ADVANCE C5255 Series Service Manual

25) Fix the DVI Cable to the 2 Wire Saddles
NOTE: When using in combination with the Copy Card Reader
• Secure the Card Reader External Relay Harness in place together with the DVI Cable
using the Wire Saddle [A] included in the package of Voice Operation Kit.
• Even when used in combination with the Card Reader, the routing of the cable is same.
9
Installation > Voice Operation Kit C2 > Operation Check > To stop the use
1) Connect the power plug of the host machine to the power outlet.
2) Open the switch cover and turn ON the main power switch.
3) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
4) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > [Voice
5) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and
F-9-225
■ When using
1) Press Reset Key and Voice Recognition Button for 3 secs or more.
2) In the operation screen [Voice Navigation], select one of the following: [Manual+Vocal
3) The display in Panel Screen, if the display in panel screen is boxed with red frame, "Voice
[A]
If "Voice Guidance Kit" doesn't properly operate, check the below.
• Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether
F-9-226
• Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether ASR-
■ To stop the use
1) Press the Reset Key for 3 secs or more.
9 Installation > Voice Operation Kit C2 > Operation Check > To stop the use

Setting Check

NOTE:
When changing the settings upon user's request, it is required to log in as a system
manager in accordance with instructions from the user administrator.
make sure that [Use Voice Navigation] is [ON].
Navigation at Startup] and make sure that is [Select Mode at Startup] set.
make sure that [Tune Microphone] is displayed.

Operation Check

Mode/Vocal Mode/Manual Mode], and press OK.
Guidance Kit" is available.
NOTE:
If [Manual Mode] is selected in [Voice Navigation], nothing is going to happen even if
Voice Recognition Button is pressed.
languages to be used for TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE are properly installed.
JA/ASR-EN is properly installed.
9-88
9-88