Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1029

■ ACC
COPIER > OPTION > ACC
COIN Setting of charge management
Lv.1 Details To set charge management method.
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Following items are automatically specified when changing the value
to 3 (from 0 to 2) when setting 3. The change will not be returned even
if changing back the value to 0 to 2 (from 3) once the mode has been
changed.
- COPIER> OPTION> USER> CONTROL, AFN-PSWD=1
- COPIER> OPTION> NETWORK> DA-CNCT=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX=0
- Preferences> Network> TCP/IP Settings> IPv4 Settings> IP Address
Range Settings> RX/Print Range: Permit IPv4 Address=ON
- Preferences> Network> TCP/IP Settings> IPv6 Settings> IP Address
Range Settings> RX/Print Range: Permit IPv6 Address=ON
- Preferences> Network > TCP/IP Settings > FTP Print Settings > Use
FTP Printing=OFF
- Preferences> Network> TCP/IP Settings> IPP Print Settings=ON
- Preferences> Network> SMB Server Settings> SMB Printer
Settings> Use SMB=ON
- Function Settings> Send> E-mail/I-Fax Settings> Communication
Settings> SMTP Receive, POP=OFF
Following items are automatically specified when changing the value
to 4 (from 0 to 2) when setting 4. The change will not be returned even
if changing back the value to 0 to 2 (from 4) once the mode has been
changed.
- COPIER> OPTION> USER> AFN-PSWD=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX, UI-
RSCAN, UI-EPRNT, UI-HOLD=0
- Management Settings> Device Management> Display Log=OFF
Display/adj/set range 0 to 7
0: No charge
1: Charge with Coin Manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: New SC mode
6: External charge mode 6
7: External charge mode 7
Default value 0
Related service mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> NETWORK> DA-CNCT
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
8
Service Mode > COPIER > OPTION > ACC
8 Service Mode > COPIER > OPTION > ACC
COPIER > OPTION > ACC
DK-P Setting of Paper Deck paper size
Lv.1 Details To set the paper size used in the Paper Deck.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: A4, 1: LTR, 2: Not used
Default value 0
CARD-SW Screen set when Coin Manager connected
Lv.1 Details To set coin or card that the user is urged to insert on the Control Panel
when the Coin Manager is connected.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Coin, 1: Card, 2: Coin and card, 3: Card (for customization)
Default value 0
SC-TYPE Set of Coin Manager supported machine
Lv.2 Details To set the machine that supports the Coin Manager.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this setting for the machines other than the ones that
support the Coin Manager.
Display/adj/set range 0 to 1
0: Machine installed in convenience stores, 1: Self-operated copy
machine
Default value 0
OUT-TRAY Presence/absence of Third Delivery Tray
Lv.1 Details To set whether the Third Delivery Tray is installed or not.
When the Third Delivery Tray is installed, set 1.
Use case When the Third Delivery Tray is installed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not installed, 1: Installed
Default value 0
8-209
8-209