Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1012

■ USER
COPIER > OPTION > USER
COPY-LIM Setting of upper limit for copy
Lv.1 Details To set the upper limit value for copy.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 9999
Default value 999
SLEEP ON/OFF of auto sleep function
Lv.1 Details To set ON/OFF of auto sleep function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
SIZE-DET ON/OFF of original size detect function
Lv.2 Details To set ON/OFF of original size detection function.
Use case Upon user's request (glare of the Scan Lamp, etc)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
COUNTER1 Display of software counter 1
Lv.1 Details To display counter type for software counter 1 on the Counter Check
screen.
Use case Upon user/dealer's request
Adj/set/operate method N/A (Display only)
Caution Display only. No change is available.
Display/adj/set range 0 to 999
0: No registration
Default value The value differs according to the location.
COUNTER2 Setting of software counter 2
Lv.1 Details To set counter type for software counter 2 on the Counter Check screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: No registration
Default value The value differs according to the location.
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
COUNTER3 Setting of software counter 3
Lv.1 Details To set counter type for software counter 3 on the Counter Check screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: No registration
Default value The value differs according to the location.
COUNTER4 Setting of software counter 4
Lv.1 Details To set counter type for software counter 4 on the Counter Check screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: No registration
Default value The value differs according to the location.
COUNTER5 Setting of software counter 5
Lv.1 Details To set counter type for software counter 5 on the Counter Check screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: No registration
Default value 0
COUNTER6 Setting of software counter 6
Lv.1 Details To set counter type for software counter 6 on the Counter Check screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: No registration
Default value 0
DATE-DSP Setting of date/time display format
Lv.2 Details To set date/time display format according to the country or region.
After the display format is set with this mode, the order of date is
reflected to the followings: Preferences > Timer/Energy Settings > Date/
Time Settings, and report output.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
Default value The value differs according to the location.
8-192
8-192