Installing The Led Board - Canon imageRUNNER ADVANCE C5255 Series Service Manual

17) Remove the HDD (160GB) installed as standard from the removed HDD Unit.
(Removed HDD (160GB) will not be used.)
• 2 Screws (Removed screw will be used in step 18).)
x2
18) Install the Option HDD (1TB).
• 2 Screws (The screw removed in step 17).)
CAUTION:
Be sure to prevent the gasket from coming off when installing.
x2
19) Install the HDD Unit to the host machine. (2 Screws)
9
Installation > [TYPE-7] > Installing the LED Board
1) Install the LED Board (small) (FK2-7400 or A: LED).
• 2 Screws (TP; M3x6)
F-9-687
2) Install the 2 wire saddles and the edge saddle.
F-9-688
9 Installation > [TYPE-7] > Installing the LED Board

Installing the LED Board

x2
Wire Saddles
Edge Saddle
9-258
F-9-689
F-9-690
9-258