Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1210

13) Instal the Top Cover.
• 3 Hooks
• 2 Screws
• 2 Rubber Caps
14) Install the Top Rear Cover.
• 5 Hooks
• 2 Screws
• 2 Rubber Caps
15) Install the Printer Model Front Cover. and return the Control Panel Cover to its
original position.
• 4 Hooks
• 2 Screws (RS Tightening)
• 1 Screw (TP) on the Control Panel Base Cover
16) Return the Control Panel.
17) Install the Top Left Cover and Top Right Cover.
• 5 Hooks each
• 2 Screws (Binding) each
• 2 Rubber Caps each
9
Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Installation Procedure > Installing the USB Device Port
NOTE:
Steps 18 and 19 apply to "USB Device Port-E3" only.
18)
• 2 Bosses
• 4 Hooks
NOTE:
Align 2 hooks [A] and bosses (long holes) to the DP Base and then insert them. The
installation will be difficult if the positioning holes for bosses are aligned first.
9 Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Installation Procedure > Installing the USB Device Port
Assemble the DP Base and the DB Base Cover.
Hook [A]
Boss
Hook
9-140
Hook [A]
Hook
F-9-372
9-140