Operation Check [Usb Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2] - Canon imageRUNNER ADVANCE C5255 Series Service Manual

10) When installing the USB Device Port simultaneously, remove the Protection Sheet on
the Transparent Cover.
11) Connect the power plug of the host machine to the power outlet.
12) Turn ON the main power switch.
13) Connect the memory media to the Card Slot of the USB Device Port and perform the
operation check.
14) If installing simultaneously with the USB Device Port, connect the memory media to
the USB slot and perform the operation check.
NOTE:
Refer to the "Operation Check [USB Device Port-E1/E2/E3 / Multimedia Reader/
Writer-A2]" to perform the connection check of the memory media.
.
9
Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Operation Check [USB Device Port-E1/E2/E3 / Multimedia Reader/W
Operation Check [USB Device Port-E1/E2/E3 /
Multimedia Reader/Writer-A2]
NOTE:
•
•
•
■ Writing Check
1) Select "1" for the following service mode (Level 2). (Default value "0")
CPIER > OPTION > DSPLY-SW > UI-MEM
2) To make the setting value effective, turn OFF/ON the main power of the Host Machine.
3) Mount the Memory Media to the Multimedia Card Reader/Writer. (Check that the Mount
Mark is indicated in the bottom right.)
9 Installation > USB Device Port-E1/E2/E3 / Multimedia Reader/Writer-A2/A3 > Operation Check [USB Device Port-E1/E2/E3 / Multimedia Reader/W
Connect a USB memory device to the USB Device Port-E1/E2/E3 and perform the
operation check.
Memory media including SD card, Memory Stick and CF card can be connected to the
Multimedia Reader/Writer-A2. Connect one of these 3 memory device and perform the
operation check.
When changing the settings upon user's request, it is required to log in as a system
manager in accordance with instructions from the user administrator.
9-163
F-9-426
9-163