Canon imageRUNNER ADVANCE C5255 Series Service Manual page 952

COPIER(1)>FUNCTION(4)>INSTALL(1)(list:29)
INISET-K Exe of Bk Dev Ass'y initial instal mode
Lv.1 Details To automatically execute operation necessary for initial installation of
the Bk Developing Assembly.
1. Idle rotation of the Developing Assembly
2. Initialization of the Toner Density Sensor
3. Secondary transfer ATVC control
4. Patch light intensity correction
5. Background correction
6. Discharge current control
7. Primary transfer ATVC control
8. Initialization of the Patch Sensor
9. Auto registration
10. D-max control
11. D-half control
12. ARCDAT-Lite (creation of target)
13. Cleaning of the Secondary Transfer Roller twice
14. Counter reset of the Developing Assembly
Use case When replacing the Bk Developing Assembly
Adj/set/operate method Select the item, and then press OK key.
Caution - When installing the machine or replacing the Developing Assembly
of other color, do not use this item.
Display/adj/set range During operation: xxx second (remaining time), At normal termination:
OK, At abnormal termination: NG
Required time 155 sec
Related service mode COPIER> FUNCTION> INSTALL> INISET-Y, INISET-M, INISET-C,
INISET-K
BRWS-ACT ON/OFF of service browser
Lv.1 Details To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power switch
is turned OFF/ON after execution.
If connection with the UGW server is successful, "OK!" is displayed. If
"NG!" is displayed, execute a communication test using COM-TEST.
The setting is enabled after reboot. Whether the service browser is
ON or OFF can be checked in COPIER> DISPLAY> USER> BRWS-
STS (1: ON, 2: OFF).
Use case - When using the service browser
- At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After execution, turn OFF/ON the main power switch. After reboot,
be sure to check the usage status in COPIER> DISPLAY> USER>
BRWS-STS.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
Related service mode COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
8
Service Mode > COPIER > FUNCTION > INSTALL
8 Service Mode > COPIER > FUNCTION > INSTALL
COPIER(1)>FUNCTION(4)>INSTALL(1)(list:29)
CDS-CTL Set country/area when using CDS
Lv.1 Details To set country/area to enable CDS.
Use case When enabling CDS
Display/adj/set range Country/area set in COPIER> OPTION> FNC-SW> CONFIG, CA
(Canada), LA (Latin America) and HK (Hong Kong)
Default value The value differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> CONFIG
HD-CRYP Exe HDD Encrypt Board ini install mod
Lv.1 Details To automatically execute operation necessary for initial installation of
the HDD Encryption Board.
By turning OFF the main power switch after execution, the HDD
Encryption Board can be installed.
Use case At installation of the HDD Encryption Board
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
RDSHDPOS Auto adj of Reader shading position
Lv.1 Details To adjust the shading position automatically.
Use case When replacing the unit
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range -100 to 100
Unit mm
Default value 0
Required time 10 sec
BIT-SVC ON/OFF of Web Service for eRDS
Lv.1 Details To set ON/OFF of Web Service for eRDS. When OFF is set,
authentication information from eRDS cannot be obtained.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0:OFF 1:ON
Default value 1
8-132
T-8-37
8-132