Installation Procedure - Canon imageRUNNER ADVANCE C5255 Series Service Manual

Installation Procedure

■ Removing the HDD Unit, Signal Cable and Power Supply Cable
1) Open the Right Lower Cover. (Open the Right Upper Cover simultaneously.)
2) Open the Right Rear Cover 1.
3) Remove the Right Rear Cover 1.
• 1 Screw (RS tight; M4)
• 2 Screws (TP; M3)
• 1 Claw
9
Installation > [TYPE-2] > Installation Procedure > Removing the HDD Unit, Signal Cable and Power Supply Cable
F-9-453
x3
Claw
F-9-454
9 Installation > [TYPE-2] > Installation Procedure > Removing the HDD Unit, Signal Cable and Power Supply Cable
4) When the Reader is installed, remove the Reader Power Cable.
• 2 Connectors
• 2 Wire Saddles
• 1 Cable Guide
x2
Reader Power
Cable
x2
Wire Saddles
5) Remove the Left Rear Cover.
• 2 Rubber Caps
• 2 Screws
• 5 Claws
x2
x5
9-178
Cable Guide
Connectors
F-9-455
claw
F-9-456
9-178