Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1004

■ IMG-FIX
COPIER > OPTION > IMG-FIX
FX-S-TMP ITOP control temperature: Plain paper
Lv.1 Details To set the offset of ITOP control temperature for plain paper (64 to 81
g/m2) at 1/1 speed.
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of plain paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: 5 deg C, 2: 10 deg C
Unit deg C
Default value 0
TMP-TBL2 Fixing control temperature:Heavy paper 1
Lv.1 Details To set the offset of fixing control temperature for heavy paper 1 (106 to
163 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on heavy paper 1
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
TMP-TBL3 Fixing control temperature:Heavy paper 2
Lv.1 Details To set the offset of fixing control temperature for heavy paper 2 (164 to
209 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on heavy paper 2
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
8
Service Mode > COPIER > OPTION > IMG-FIX
8 Service Mode > COPIER > OPTION > IMG-FIX
COPIER > OPTION > IMG-FIX
TMP-TBL4 Fixing control temperature:Heavy paper 3
Lv.1 Details To set the offset of fixing control temperature for heavy paper 3 (210 to
256 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on heavy paper 3
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
TMP-TBL5 Fixing control temperature: Thin ppr
Lv.1 Details To set the offset of fixing control temperature for thin paper (52 to 63 g/
m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on thin paper
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
TMP-TBL6 Fixing control temperature: Envelope
Lv.1 Details To set the offset of fixing control temperature for envelope.
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When offset/fixing failure occurs on envelope
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
8-184
8-184