Canon imageRUNNER ADVANCE C5255 Series Service Manual page 585

● SST to USB memory Storage Device
Copy the system software stored in SST to the USB memory storage device storage device.
Preparation
Requirements:
• PC with SST Ver. 4.41 or later installed
• USB memory storage device (*)
Requirements for USB memory storage device:
Interface: USB 1.1 or later (USB 2.0 is recommended)
Memory capacity: 1GB or more is recommended (the total file size of the system software
is approx. 500MB).
Format: FAT (FAT 16), FAT32 (NTFS and HFS are not supported). The memory is formatted
in a partition (multiple partitions are not supported)
Unavailable USB memory: memory that is protected by a password or the encryption
technology.
Steps to copy the system software
1) Start the PC.
2) Insert the USB memory storage device storage device to the slot of the PC.
3) Start SST.
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
6 Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
4) Click the USB icon shown in "Select the target" Screen.
5) Select the drive (removable disk) where the USB memory storage device storage device is
inserted.
6-47
F-6-70
F-6-71
6-47