Description On The Parts Included In The Package; When Using The Parts Included In The Package; Symbols In The Illustration; Things To Do Before Installation - Canon imageRUNNER ADVANCE C5255 Series Service Manual

How to Check this Installation Procedure

Description on the parts included in the package

The parts with a diagonal line in the contents list will not be used.

When Using the Parts Included in the Package

A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item

Symbols in the Illustration

The frequently-performed operations are described with symbols in this procedure.
Screw Connector
Tighten Remove Connect
Claw
Insert Remove Push
Checking instruction
Check Visual Check Sound Check
9
Installation > Things to do Before Installation > Selecting an Installing Location
F-9-1
Harness
Disconnect Secure Free
Plug in Turn on
F-9-2
9 Installation > Things to do Before Installation > Selecting an Installing Location

Things to do Before Installation

Selecting an Installing Location

The installing location needs to meet the following conditions:
Thus, it is desirable to go over the planned installing location before bringing the machine to
the user's site.
1) There must be a power outlet properly grounded and rated as indicated (+, -10%) for
exclusive use by the machine.
2) Environment of the installation site must be within the range indicated below. Avoid any
area near the faucet, the water heater, the humidifier, or the refrigerator.
• Operation/image assured range: temperature: 15.0 to 30.0 deg C, humidity: 5 to 80%
3) Keep the installation site away from the source of fire, a dusty place, or a place generating
ammonia gas. In the case of installing this equipment in a place subject to direct sunlight, it
is recommended to hang curtains over the window.
4) Be sure to provide adequate ventilation of the room to keep the work environment
comfortable. Room odor can be bothering when running the machine for a long time in a
poorly-ventilated room although the ozone amount generated while running this equipment
does not harm human health..
5) The foot of this equipment should be in contact with the floor. This equipment should be
kept on the level.
9-2
9-2