Canon imageRUNNER ADVANCE C5255 Series Service Manual page 720

E Detailed Occurance Items
code code area
E061 0201 05 Title Abnormal current run to the C Drum
Description Abnormal current run to the C Drum (small current level
or no drum is found)
Remedy 1. Check installation of the Drum Unit.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point).
3. Check if there is failure in grounding contact with the
Drum at Process Unit side.
4. Replace the Drum Unit.
5. Replace the Pre-exposure LED PCB (UN27,UN28).
E061 02E0 05 Title Abnormal current run to the C Drum
Description The change in current level for C Drum film thickness
detection is too much compared to the previous time.
Remedy 1. Check with the Host Machine which generates an error
to check if a wrong cartridge (which is different from the
initialized cartridge) is installed.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point)
3. Check if there is failure in grounding contact with the
Drum at Process Unit side.
4. Replace the Drum Unit.
5. Replace the Pre-exposure LED PCB (UN27,UN28).
E061 03F0 05 Title Abnormal current run to the C Drum
Description Abnormal initial current level at the time of initialization of
the C Drum film thickness (large current level)
Remedy 1. Check installation of the Drum Unit.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point).
3. Check if there is failure in grounding contact with the
Drum at the Process Unit side.
4. Forced initialization in Service Mode: COPIER >
FUNCTION > DPC > DRMRSETC: execution of the color
causing the error.
5. Replace the Drum Unit.
6. Check the primary transfer voltage value (if it's not
appropriate, turn OFF and then ON the main power to
forcibly execute the ATVC control).
7
Error•Jam•Alarm > Error Code > Error Code Details
Description
7 Error•Jam•Alarm > Error Code > Error Code Details
E Detailed Occurance Items
code code area
E061 03F1 05 Title Abnormal current run to the C Drum
Description Abnormal initial current level at the time of initialization of
the C Drum film thickness (small current level)
Remedy 1. Check installation of the Drum Unit.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point).
3. Check if there is failure in grounding contact with the
Drum at Process Unit side.
4. Forced initialization in Service Mode: COPIER >
FUNCTION > DPC > DRMRSETC: execution of the color
causing the error)
5. Replace the Drum Unit.
6. Replace the Pre-exposure LED PCB (UN27,UN28).
E061 0301 05 Title Abnormal current run to the Bk Drum
Description Abnormal current run to the Bk Drum (small current level
or no drum is found)
Remedy 1. Check installation of the Drum Unit.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point).
3. Check if there is failure in grounding contact with the
Drum at Process Unit side.
4. Replace the Drum Unit.
5. Replace the Pre-exposure LED PCB (UN29,UN30).
E061 03E0 05 Title Abnormal current run to the Bk Drum
Description The change in current level for Bk Drum film thickness
detection is too much compared to the previous time.
Remedy 1. Check with the Host Machine which generates an error
to check if a wrong cartridge (which is different from the
initialized cartridge) is installed.
2. Check if there is failure in grounding contact at the
Drum Unit side (such as loosened screw which secures
the plate at the contact point)
3. Check if there is failure in grounding contact with the
Drum at Process Unit side.
4. Replace the Drum Unit.
5. Replace the Pre-exposure LED PCB (UN29,UN30).
7-29
Description
7-29